Later on today I will work more with my system setup. You need the dish to be tilted up Your inclinometer should read Here are a couple of pictures of the inclinometer attached to the 1.
Finally got the setup working but with some crazy results Will start a new thread and report about it. Page 1 of 2 1 2 Last Jump to page:. Posting Permissions. Translations by vBET Translator 2. Lift the azimuth scale to reveal the Limit Sliders. Loosen the screw on the Limit Slider. Do not loosen the screw thoroughly; otherwise, the Slider will drop into the motor. Drive the motor to the position for a favorite satellite: Set the receiver to Goto X or USALS function, input the longitude and select satellite, the receiver will calculate and drive the motor to right angle automatically.
Aim the Satellite: While tuned to an active Transponder Frequency,Rotate the motor unit on the mounting pole to find the strongest quality sign … 4.
DiSEqC 1. Make sure the power of receiver is on and the indication LED on the bottom of the motor lights on. Check every devices between receiver and motor. Do you want to save? Page 9 The dish will rotate to the Galaxy25 satellite position based on the calculated values. Slightly loosen the motor on the mounting mast and rotate the motor assembly East or West on the post in very small movements while observing the Signal Quality meter. If a Signal Quality reading cannot be obtained or if the Quality is low or erratic, raise or lower the Satellite Dish Elevation by a degree and repeat the slow pan left or right rotation.
Page Final Notes Now that multiple satellites are programmed, when the satellite channel is changed on the receiver, the motor will automatically move the dish to the correct satellite location and the selected channel will appear.
Print page 1 Print document 10 pages. Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals? Sign In OR. Don't have an account?
0コメント